What amp contactor do I need for my Payne system?

The correct replacement for Payne model PA3PPA030000AB is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Payne equipment which lists the model number PA3PPA030000AB.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

Payne

OEM Payne Contactor 2-Pole 24V Coil for PA3PPA030000AB

Name: OEM Payne Contactor 2-Pole 24V Coil for PA3PPA030000AB
Brand: Payne
SKU: PAYNE-PA3PPA030000AB-CONTACTOR-HN52KC025
Price: 31.20 USD
Availability: InStock

SKU: PAYNE-PA3PPA030000AB-CONTACTOR-HN52KC025 Brand: Payne

✓ Guaranteed to fit PA3PPA030000AB — or your money back. Terms

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

OEM Payne 2-Pole Contactor 24V Coil for Model PA3PPA030000AB

This OEM contactor is the factory-specified replacement for the Payne PA3PPA030000AB split-system air conditioner. The contactor is a high-voltage relay that receives a 24V signal from the thermostat and closes the circuit to send 240V power to the compressor and condenser fan motor. When the contactor fails, the most common symptoms are an air conditioner that won't turn on, a system that hums at the condenser but never starts, or visible pitting and burning on the contact points.

Specs: 2-pole design | 24V control coil | Heavy-duty contact rating | OEM part number HN52KC025 | Factory-matched to Payne PA3PPA030000AB specifications
OEM vs Generic: This OEM contactor is manufactured to exact factory tolerances for contact gap, coil pull-in voltage, and current capacity. Generic contactors frequently use lower-grade contact materials that arc and pit prematurely, leading to repeat failures and potential compressor damage.
Install Difficulty: 3/5 — Always shut off power at the disconnect box AND the breaker before servicing. Tools needed: flathead and Phillips screwdrivers, 1/4" nut driver, needle-nose pliers, multimeter. Photograph all wiring before disconnecting terminals. Verify coil voltage and pole count match your unit's data plate.
Warranty: 1-year OEM factory warranty. In stock and ships same business day from our warehouse when ordered before 3PM local time.

Compatibility: Designed as a direct OEM replacement for the Payne PA3PPA030000AB condensing unit. Always cross-reference OEM part number HN52KC025 and verify pole count and coil voltage against your unit's wiring diagram or data plate before ordering. Our fitment team is available to confirm compatibility before you buy — no guesswork required.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $99
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Payne Contactor 2-Pole 24V C...

$31.20

Frequently Asked Questions

Does this Contactor fit my Payne PA3PPA030000AB?

Yes. This is the factory-specified OEM contactor for the Payne PA3PPA030000AB. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my Payne PA3PPA030000AB?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many Payne parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Payne contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu

OEM Payne Contactor 2-Pole 24V Coil for PA3PPA030000AB

OEM Payne 2-Pole Contactor 24V Coil for Model PA3PPA030000AB

Shipping Information

Return Policy

Frequently Asked Questions