What amp contactor do I need for my Payne system?

The correct replacement for Payne model PA1PPB030000AAAA is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Payne equipment which lists the model number PA1PPB030000AAAA.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

Payne

OEM Payne 410A Contactor 2-Pole 24V Coil for PA1PPB030000AAAA

Name: OEM Payne 410A Contactor 2-Pole 24V Coil for PA1PPB030000AAAA
Brand: Payne
SKU: PAYNE-PA1PPB030000AAAA-CONTACTOR-HN52KC025
Price: 31.20 USD
Availability: InStock

SKU: PAYNE-PA1PPB030000AAAA-CONTACTOR-HN52KC025 Brand: Payne

✓ Guaranteed to fit PA1PPB030000AAAA — or your money back. Terms

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

OEM Payne 2-Pole Contactor for Model PA1PPB030000AAAA (HN52KC025)

This is the factory OEM replacement contactor for the Payne PA1PPB030000AAAA air conditioning system. The contactor is a high-voltage relay that receives a low-voltage signal (24V) from your thermostat and switches line voltage to the compressor and condenser fan motor. When the contactor fails, the most common symptoms include the AC unit not turning on at all, the compressor cycling off unexpectedly, or visible pitting and burning on the contact points inside the unit.

Specs: 2-pole configuration | 24V coil voltage | Factory OEM part number HN52KC025 | Designed for R-410A split-system air conditioners
OEM vs Generic: This OEM contactor is built to Payne's exact electrical tolerances, ensuring reliable coil pull-in voltage and contact durability. Generic contactors frequently use lower-grade contact materials that pit faster under high-cycle residential use, leading to repeat failures within a single season.
Install difficulty: 2/5 — Always shut off power at the disconnect box and verify voltage is absent with a multimeter before beginning. Tools needed: flathead and Phillips screwdrivers, needle-nose pliers, multimeter. Photograph all wiring connections before removing the old contactor to ensure correct reinstallation.
Warranty: 1-year OEM factory warranty. Orders placed before cutoff ship same business day from our stocked warehouse.

Compatibility: Engineered as the direct drop-in replacement for the Payne PA1PPB030000AAAA split-system air conditioner. Always verify coil voltage and pole configuration against your unit's wiring diagram or data plate before ordering. Our HVAC parts specialists are available to confirm fitment before you buy — no guesswork required.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $99
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Payne 410A Contactor 2-Pole ...

$31.20

Frequently Asked Questions

Does this Contactor fit my Payne PA1PPB030000AAAA?

Yes. This is the factory-specified OEM contactor for the Payne PA1PPB030000AAAA. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my Payne PA1PPB030000AAAA?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many Payne parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Payne contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu

OEM Payne 410A Contactor 2-Pole 24V Coil for PA1PPB030000AAAA

OEM Payne 2-Pole Contactor for Model PA1PPB030000AAAA (HN52KC025)

Shipping Information

Return Policy

Frequently Asked Questions