Same-day shipping on orders before 3PM CST · 15,000+ OEM Parts In Stock · Carrier · Bryant · ICP · Heil · Tempstar
Track Order | 1-800-NHP-HVAC | Trade Accounts

Menu

Home Shop All Account Cart
Home / OEM Payne Pressure Switch High/Low fo...
OEM Payne Pressure Switch High/Low for PA13NR060000AAAA
Payne

OEM Payne Pressure Switch High/Low for PA13NR060000AAAA

SKU: PAYNE-PA13NR060000AAAA-PRESSURE_SWITCH-HK02ZA395 Brand: Payne

Order before 3PM CST — ships same day.
Standard delivery 2-5 business days. Express options at checkout.

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

OEM Payne High & Low Pressure Switch for Model PA13NR060000AAAA

This OEM pressure switch is the factory-specified replacement for the Payne PA13NR060000AAAA packaged gas/electric unit. The pressure switch proves that the inducer motor is operating and creating adequate draft before allowing the ignition sequence to proceed. A failed pressure switch causes the system to lock out before any ignition attempt — you may notice the inducer motor running but no ignition, a blinking fault code for "pressure switch stuck open," or intermittent no-heat calls on cold days. Two OEM part numbers are available: HK02ZA395 (High Pressure Switch) and HK02ZB028 (Low Pressure Switch) — verify which switch your service diagnosis points to before ordering, or replace both for a complete repair.

  • Specs: OEM-rated water column (W.C.) pull-in and drop-out set points | Direct factory replacement for Payne PA13NR060000AAAA | Includes wiring harness connector | Matches original flue/port tube configuration — verify single-stage or two-stage inducer before ordering
  • OEM vs Generic: OEM pressure switches are calibrated to exact W.C. specifications for this unit's inducer and heat exchanger. Off-brand switches frequently carry wider tolerances that allow operation under marginal draft conditions, risking incomplete combustion or nuisance lockouts.
  • Install difficulty: 3/5 — Turn off power and gas before servicing. Tools needed: 1/4" and 5/16" nut drivers, needle-nose pliers, short vacuum/pressure gauge (recommended for confirming switch set point). Photograph existing tubing and wiring connections before disconnecting. Inspect rubber hose for cracks or blockages — a collapsed hose often mimics a failed switch.
  • Warranty: 1-year OEM factory warranty against defects. In-stock units ship the same business day from our warehouse.

Compatibility: Designed specifically for the Payne PA13NR060000AAAA packaged unit. Select HK02ZA395 for the high pressure switch circuit or HK02ZB028 for the low pressure switch circuit. Confirm your fault code or measured W.C. reading to identify the correct switch. Need help confirming fitment? Our HVAC parts specialists verify compatibility before you order — reach out before purchasing if unsure.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $75
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email support@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Pressure Switch fit my Payne PA13NR060000AAAA?
Yes. This is the factory-specified OEM pressure switch for the Payne PA13NR060000AAAA. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the pressure switch on my Payne PA13NR060000AAAA?
Difficulty: Medium (20–30 min)
Step 1: Turn off power. Step 2: Locate pressure switch near draft inducer. Step 3: Note tubing orientation. Step 4: Disconnect tubing and wires. Step 5: Remove screw, install new switch. Step 6: Reconnect tubing and wires, restore power.
My furnace shows a pressure switch error. What do I replace?
Furnace LED showing pressure switch error = switch not detecting draft inducer airflow. Try first: clear the rubber tubing to the switch (often clogged with condensation). If problem persists, replace the pressure switch.
Is this pressure switch compatible with Bryant or Payne too?
Many Payne parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my Payne pressure switch?
OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart