What MFD capacitor do I need for my Payne AC?

The correct replacement for Payne model PA13NR030000AEAA is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Payne equipment which lists the model number PA13NR030000AEAA.

My AC hums but will not start. What part do I need?

An AC that hums but will not start is the classic symptom of a failed capacitor. The capacitor provides the electrical boost needed to start the compressor and fan motors. When it fails, you hear the hum of the motor trying to start but it cannot overcome inertia. Other symptoms include the fan spinning slowly, the AC cycling on and off rapidly, or a visibly swollen or leaking capacitor. Replacement cost: $15 to $80 for the part, DIY in 30 minutes.

Payne

OEM Payne Start Capacitor P281-1766 for PA13NR030000AEAA

Name: OEM Payne Start Capacitor P281-1766 for PA13NR030000AEAA
Brand: Payne
SKU: PAYNE-PA13NR030000AEAA-CAPACITOR-P281-1766
Price: 25.00 USD
Availability: InStock

SKU: PAYNE-PA13NR030000AEAA-CAPACITOR-P281-1766 Brand: Payne

✓ Guaranteed to fit PA13NR030000AEAA — or your money back. Terms

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

OEM Payne Start Capacitor P281-1766 for Model PA13NR030000AEAA

This is the factory OEM start capacitor (part number P281-1766) for the Payne PA13NR030000AEAA split-system air conditioner. The start capacitor provides the high-voltage electrical boost needed to get the compressor motor spinning from a dead stop. Without a functioning start capacitor, the compressor will hum, trip on thermal overload, or fail to start entirely — leaving your system locked out and unable to cool.

Specs: OEM-matched microfarad (MFD) and voltage rating | Factory-specified tolerance | Designed for single-phase compressor start assist on the Payne PA13NR030000AEAA condenser
OEM vs Generic: This is a genuine OEM replacement part carrying the exact capacitance tolerance required by Payne. Aftermarket start capacitors often ship with wider MFD variance, which can stress the compressor start winding and reduce equipment lifespan.
Install difficulty: 2/5 — Always discharge the capacitor before handling using an insulated resistor or discharge tool. Tools needed: flathead and Phillips screwdrivers, 1/4" nut driver, needle-nose pliers, and a multimeter to verify discharge. Photograph all wiring connections before removal.
Warranty: Backed by a 1-year OEM manufacturer warranty. Orders placed before cutoff ship same business day from our stocked warehouse.

Compatibility: Engineered specifically for the Payne PA13NR030000AEAA 2.5-ton single-stage split-system condenser. Always confirm your unit's data plate capacitor ratings (MFD and voltage) match before installing. Not sure if this is the right part? Our HVAC parts specialists verify fitment before every order — contact us and we'll confirm compatibility at no charge.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $99
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Payne Start Capacitor P281-1...

$25.00

Frequently Asked Questions

Does this Capacitor fit my Payne PA13NR030000AEAA?

Yes. This is the factory-specified OEM capacitor for the Payne PA13NR030000AEAA. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the capacitor on my Payne PA13NR030000AEAA?

Difficulty: Easy (20–30 min)
Step 1: Turn off power at breaker. Step 2: Open condensing unit panel. Step 3: Photograph the old capacitor wiring (Common/Herm/Fan). Step 4: Discharge old capacitor with insulated screwdriver. Step 5: Disconnect and remove old capacitor. Step 6: Mount new capacitor, reconnect wires to matching terminals. Step 7: Close panel, restore power, test. Tools: screwdriver, needle-nose pliers.

My AC hums but won’t start. What part do I need?

An AC that hums but won’t start is the classic symptom of a failed capacitor. The capacitor provides the electrical boost to start the compressor. When it fails, you hear humming but the motor can’t overcome inertia. Other symptoms: fan spinning slowly, AC cycling on/off rapidly, or a visibly swollen capacitor. Fix: replace capacitor ($15–$80 DIY, 30 min).

Is this capacitor compatible with Bryant or Payne too?

Many Payne parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Payne capacitor?

OEM strongly recommended. OEM capacitors have ±6% MFD tolerance vs aftermarket ±10%. The looser tolerance causes motor winding stress, higher temps, and shorter compressor life. Price difference is only $10–$20 — OEM is the clear value choice.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu

OEM Payne Start Capacitor P281-1766 for PA13NR030000AEAA

OEM Payne Start Capacitor P281-1766 for Model PA13NR030000AEAA

Shipping Information

Return Policy

Frequently Asked Questions