OEM Payne Condenser Fan Motor for Model PA12NA030000ABAA

This OEM condenser fan motor is the factory-specified replacement for the Payne PA12NA030000ABAA split-system air conditioner. The condenser fan motor drives the outdoor fan blade, pulling air across the condenser coil to dissipate heat from the refrigerant. When this motor fails, the condenser coil overheats, triggering high-pressure cutouts, compressor short-cycling, or a complete no-cool condition. Common symptoms include a buzzing outdoor unit with no fan movement, intermittent shutdowns on hot days, or a motor that runs hot and trips its internal thermal overload.

• Specs: Replaces OEM part numbers HC35GE237 and HC38GE231 | 1/4 HP factory-matched output | 208–230V single-phase | Correct rotation, RPM, and shaft diameter per factory specification | Pre-lubricated sleeve or ball bearings rated for outdoor use
• OEM vs Generic: OEM motors are wound to exact factory torque and current-draw specs, ensuring proper airflow and compressor protection. Generic motors frequently deviate in RPM and amp draw, risking compressor damage from inadequate heat rejection.
• Install difficulty: 3/5 — Disconnect power and capacitor before removal. Tools needed: 1/4" and 5/16" nut drivers, multimeter, wire nuts or spade connectors. Note motor rotation direction and wiring colors before disconnecting. Blade hub may require a puller on seized shafts.
• Warranty: 1-year OEM factory warranty against defects. Ships same business day from our warehouse when ordered before cutoff.

Compatibility: Engineered for the Payne PA12NA030000ABAA 2.5-ton split-system condenser. Always verify HP, voltage, RPM, and shaft diameter against your unit's data plate and existing motor nameplate before installing. Our fitment team is available to confirm compatibility before you order — reach out with your model and serial number for a fast verification.