OEM Payne Condenser Fan Motor for Model PA10JA04800MADAA

This OEM condenser fan motor is the factory-specified replacement for the Payne PA10JA04800MADAA split-system air conditioner. The condenser fan motor drives the outdoor unit's fan blade, pulling air across the condenser coil to dissipate heat from the refrigerant. When this motor fails, the condenser coil overheats, triggering high-pressure lockouts, compressor shutdowns, and a complete loss of cooling. Common symptoms include the outdoor fan not spinning, the unit shutting off shortly after startup, or audible grinding and squealing from the condenser cabinet.

• Specs: 1/4–1/2 HP | Factory-matched RPM and rotation direction | Correct shaft diameter and mounting configuration for PA10JA04800MADAA | 48-frame design | Replaces OEM part numbers HC39GE237 and HC40GE232
• OEM vs Generic: This factory OEM motor is wound to exact torque and RPM specifications for your Payne unit. Generic motors often differ in rotation direction, shaft length, or speed rating — mismatches that can damage the compressor or void equipment warranties. OEM is always the safe choice.
• Install Difficulty: 3/5 — Disconnect power and verify zero voltage before opening the condenser cabinet. Tools needed: nut driver set, wire stripper, multimeter, and capacitor discharge tool. Note existing wire colors and rotation direction before removing the old motor. The run capacitor should be tested and replaced if worn, as a weak capacitor accelerates motor failure.
• Warranty: 1-year OEM factory warranty against defects. In-stock units ship same business day when ordered before cutoff.

Compatibility: Engineered specifically for the Payne PA10JA04800MADAA 4-ton split-system condenser. Always confirm HP, RPM, rotation, and shaft diameter against your unit's data plate and existing motor label before installing. Our fitment team is available to verify compatibility before you order — no guesswork required.