OEM Carrier Run Capacitor for YAC2480YAC106K Condenser Unit

Your Carrier YAC2480YAC106K relies on its run capacitor to supply the phase-shifted current that lets the compressor and condenser fan motor start and run at the correct, efficient amperage. Think of it as the torque reservoir for a single-phase motor — without a healthy capacitor, those windings can't develop the rotating field they need. As the cap fails you'll hear the outdoor unit buzz or hum without starting, see the fan stall or need a manual push to spin, feel warm air indoors, notice the system short-cycling on and off, or find the breaker tripping from repeated locked-rotor current spikes. This dual-run capacitor is manufactured to OEM specification for the YAC2480YAC106K, typically 35-45 MFD at 370/440 VAC with a tight ±5% tolerance. The precise microfarad rating is stamped on your existing capacitor and listed on the unit data plate — always match it before ordering. Genuine OEM caps use oil-filled, 70°C-rated, UL-listed dielectric designed for 10,000-hour continuous service. Why OEM matters: budget aftermarket capacitors frequently spec ±10-15% tolerance and thinner dielectric film that drifts off-value as it heats. An out-of-spec capacitor runs the compressor windings hotter than designed, accelerating insulation breakdown and shaving years off the compressor — the single costliest part in your system. Correct MFD is cheap protection. Install difficulty: 2/5. Tools: 1/4" nut driver, insulated needle-nose pliers, multimeter with capacitance mode. SAFETY: a capacitor stores a dangerous charge even after power is cut — open the disconnect and discharge the terminals with an insulated screwdriver before handling any leads. Photograph the wiring before you disconnect anything. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model YAC2480YAC106K. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.