OEM Carrier Condenser Fan Motor 1/2 HP 208/230V 1050 RPM — HC44GE208 for TJACCYCRLOWAMB007A00

This is the genuine OEM factory-authorized replacement condenser fan motor for the Carrier TJACCYCRLOWAMB007A00 low-ambient condenser unit. The condenser fan motor drives the outdoor fan blade to pull air across the condenser coil, rejecting heat and maintaining refrigerant pressure. On low-ambient units like the TJACCYCRLOWAMB007A00, the fan motor operates under tightly controlled cycling conditions — making an exact OEM replacement critical. When this motor fails, symptoms include the outdoor fan failing to spin, the compressor overheating and tripping on high-pressure lockout, or the unit shutting down shortly after startup.

• Specs: 1/2 HP | 208/230V | 1050 RPM | 1.70 Amps | 60 Hz | 1-Phase | 48 Frame | Replaces GE Genteq 5KCP39GL665BS | Also cross-references HC44GE208A
• OEM vs Generic: This Factory Authorized Part is manufactured to exact Carrier Corporation tolerances. Generic motors often deviate in rotation direction, shaft length, or RPM, which can cause fan blade imbalance, vibration, and premature bearing failure — especially problematic in low-ambient control applications where precise airflow is critical.
• Install difficulty: 3/5 — Requires disconnecting power at the disconnect and breaker before beginning. Tools needed: 1/4" and 5/16" nut drivers, wire stripper, needle-nose pliers, multimeter, and a blade puller for the fan blade. Always photograph existing wiring before disconnecting. Verify rotation direction (typically CCW when viewed from shaft end) before final reassembly. It is strongly recommended to replace the run capacitor at the same time, as an out-of-tolerance capacitor can cause premature motor failure.
• Warranty: 1-year OEM factory warranty. In-stock units ship same business day from our warehouse when ordered before cutoff.

Compatibility: Engineered specifically for the Carrier TJACCYCRLOWAMB007A00 low-ambient condenser. Verify your unit's nameplate for HP, voltage, and RPM before ordering. Our fitment team is available to confirm compatibility before you buy — no guesswork, no returns hassle.