OEM Carrier Condenser Fan Motor with Rain Guard — HC44VL852 for Model TJACCY50DP900221

This is the OEM factory-specified condenser fan motor for the Carrier TJACCY50DP900221 commercial packaged unit. Part number HC44VL852 (GE cross-reference: 5KCP39SGL288AS) features an integrated rain guard to protect the motor windings from moisture exposure — a critical feature on rooftop and outdoor commercial installations. When this motor fails, symptoms include a locked-rotor hum at startup, the condenser fan blade not spinning while the compressor runs, or the unit tripping on high-pressure lockout due to insufficient airflow across the condenser coil. Replacement with the correct OEM unit ensures factory airflow performance is fully restored.

• Specs: 1/2 HP | 1075 RPM | 200–230/460V, 60 Hz, 1-Phase | Frame 48Y | 5 5/8" diameter | Shaft: 1/2" × 2.50" | Rotation: CCW (facing shaft end) | Ball bearing | Vertical shaft-up mount | Integrated rain guard included
• OEM vs Generic: This OEM Carrier motor is wound and balanced to exact factory tolerances, ensuring correct CFM delivery, amperage draw, and service life. Generic motors often lack the integrated rain guard and may ship with looser RPM tolerances, reducing system efficiency and risking premature failure on commercial equipment.
• Install Difficulty: 3/5 — Disconnect all power and lock out the unit before beginning. Tools needed: 5/16" and 3/8" nut drivers, adjustable wrench, multimeter, and a set-screw hex key for the fan blade hub. Always photograph the existing wiring and blade pitch angle before removal. It is strongly recommended to replace the 7.5 µF 440 VAC run capacitor at the same time — a worn capacitor is a leading cause of premature motor failure. Note: HC44VL852 has been superseded by HC44VQ852; verify your unit's data plate before ordering.
• Warranty & Shipping: 1-year OEM factory warranty. In stock and ships same business day from our warehouse.

Compatibility: Factory-specified for Carrier model TJACCY50DP900221 commercial condensing and packaged units. Verify voltage configuration (208/230V single-phase vs. 460V) on your unit's data plate prior to installation. Questions about fitment? Our HVAC parts specialists confirm compatibility before you order — contact us today.