OEM Carrier Condenser Fan Motor with Rain Guard HC44VL852 for Model TJACCY50DP900141

This OEM condenser fan motor with integrated rain guard is the factory-specified replacement for the Carrier TJACCY50DP900141 packaged HVAC unit. The condenser fan motor drives the outdoor fan blade to pull air across the condenser coil, dissipating heat absorbed from the refrigerant. When this motor fails, the condenser coil overheats, triggering high-pressure lockout or compressor trip — leaving the system unable to cool. Common failure symptoms include the fan not spinning on startup, the compressor cycling off on high pressure, or the motor running hot and humming without turning. The factory-matched rain guard protects motor windings from moisture intrusion, a critical feature on rooftop and exposed outdoor installations.

• Specs: 1/2 HP | 208/230/460V, 1-Phase | 1075 RPM | Rotation: CCW (viewed from lead end) | Shaft: 1/2" × 2.50" | Frame 48Y (5-5/8" diameter) | Ball bearing | GE/Genteq 5KCP39SGL288AS | Requires 7.5 MFD 440V run capacitor (sold separately)
• OEM vs Generic: This OEM motor is factory-tested to Carrier's Temprise thermal standard — stricter than UL 1995 — and rated for 100,000 on/off cycles and up to 50,000 total running hours. Generic motors often lack rain guard protection and use sleeve bearings that fail prematurely in outdoor environments.
• Install Difficulty: 3/5 — Disconnect power and discharge the run capacitor before starting. Tools needed: 1/2" wrench, nut driver set, wire stripper, multimeter. Photograph all wiring and note rotation direction before removing the old motor. Verify fan blade pitch and hub bore match the new motor shaft before reinstalling.
• Warranty & Shipping: Backed by OEM factory warranty. In stock — ships same business day from our warehouse.

Compatibility: Engineered for Carrier model TJACCY50DP900141 packaged commercial HVAC units. Cross-references: HC44VL852C, 5KCP39SGL288AS. Note: HC44VL852 has been superseded by HC44VQ852 in current production — confirm your unit's data plate voltage and HP before ordering, or contact our team for fitment verification. Questions? Our HVAC parts specialists confirm compatibility before you buy.