Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
OEM Carrier Definite Purpose Contactor for TCHC2550HECMRMP502
Carrier

OEM Carrier Definite Purpose Contactor for TCHC2550HECMRMP502

SKU: CARRIE-TCHC2550HECMRMP502-CONTACTOR-HN52TC040 Brand: Carrier
Guaranteed to fit TCHC2550HECMRMP502 — or your money back. Terms

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

OEM Carrier Definite Purpose Contactor for TCHC2550HECMRMP502

The contactor is the high-voltage switch that powers up your Carrier condensing unit. When the thermostat calls for cooling, the 24V control coil pulls the contacts closed, sending line voltage to the compressor and condenser fan motor. Because it cycles thousands of times per season, it is one of the most common failure points in an outdoor unit. A failing contactor produces a loud hum or buzz, contacts that weld shut (so the unit runs even with the thermostat off), or pitted, burned contacts that won't pull in at all — leaving you with a fan that won't spin, a compressor that won't start, or a breaker that trips. This genuine Carrier-spec contactor is built for model TCHC2550HECMRMP502, with the correct coil voltage (24V), pole configuration, and contact amperage rating matched to the unit's compressor and fan load. Silver-alloy contacts resist arcing and pitting across repeated cycling. Why OEM: aftermarket contactors often use undersized contacts and thinner silver plating that pit and overheat far faster, raising resistance, dropping voltage to the compressor, and shortening its life. A correctly rated genuine contactor carries the full inrush current without degrading. Install difficulty: 2 of 5 — a confident DIYer can manage it. Tools: 1/4" nut driver, insulated screwdriver, multimeter, and a wiring photo. #1 safety warning: shut off the breaker and pull the outdoor disconnect before touching the contactor — its line terminals stay at 240V even when the unit is idle. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model TCHC2550HECMRMP502. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $99
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Contactor fit my Carrier TCHC2550HECMRMP502?
Yes. This is the factory-specified OEM contactor for the Carrier TCHC2550HECMRMP502. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the contactor on my Carrier TCHC2550HECMRMP502?
Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.
My AC clicks but the compressor won’t turn on. What’s wrong?
Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.
Is this contactor compatible with Bryant or Payne too?
Many Carrier parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my Carrier contactor?
OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online