OEM Carrier Condenser Fan Motor 1/4 HP 460V for Model TCHC0650HE403309

This is the genuine OEM factory-specified condenser fan motor for the Carrier TCHC0650HE403309 commercial condensing unit. Part number HC39GE468 (superseded by HC39GE468A) is a direct Carrier replacement motor that drives the condenser fan blade, pulling ambient air across the condenser coil to reject heat from the refrigerant circuit. When this motor fails, the condenser coil overheats, refrigerant pressure spikes, and the unit will trip on high-pressure lockout or simply stop cooling altogether. Common failure signs include: a seized or humming motor, intermittent cooling followed by lockout, or a visibly stationary fan blade while the compressor runs.

• Specs: 1/4 HP | 460/400V | 60/50 Hz | 0.7A | 1100/900 RPM | Frame 48Y (5-5/8" diameter) | Single Phase | Closed Enclosure | CW Rotation | 1.5" Shaft Diameter
• OEM vs Generic: This is a genuine Carrier OEM motor built to exact factory tolerances for airflow, current draw, and bearing life. Generic aftermarket motors often deviate in RPM, amperage, and frame dimensions — risking premature failure, voided equipment warranties, and compressor damage from inadequate heat rejection.
• Install Difficulty: 3/5 — Requires disconnecting 460V power and full lockout/tagout procedure before beginning. Tools needed: multimeter, 5/16" and 3/8" nut drivers, adjustable wrench, wire stripper, and electrical tape. Always photograph all wiring connections before removal. Note: it is strongly recommended to replace the dual-run capacitor simultaneously to prevent premature motor failure.
• Warranty: 1-year OEM factory warranty against defects. Ships same business day from our warehouse when ordered by cutoff time.

Compatibility: Designed for the Carrier TCHC0650HE403309 commercial condensing unit. OEM part number HC39GE468, current active replacement part number HC39GE468A (GE/Genteq cross-reference: 5KCP39KFV110AS / 5KCP39MFS303BS). Verify voltage (460V), HP (1/4), and shaft specifications on your unit's data plate before ordering. Not for standard 208-230V residential applications. Have a fitment question? Our HVAC parts specialists confirm compatibility before you order — contact us today.