Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
OEM Carrier Contactor RSA1000L5Y for RSA1000L5Y
Carrier

OEM Carrier Contactor RSA1000L5Y for RSA1000L5Y

SKU: CARRIE-RSA1000L5Y-CONTACTOR-HN53CD209 Brand: Carrier
Guaranteed to fit RSA1000L5Y — or your money back. Terms

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

OEM Carrier Contactor RSA1000L5Y for RSA1000L5Y

The contactor is the high-voltage switch that powers your Carrier condenser's compressor and outdoor fan motor. When the thermostat calls for cooling, the 24V coil pulls the contacts closed, sending line voltage to the compressor. When it fails, the symptoms are obvious to a homeowner: the outdoor unit hums but won't start, the fan and compressor won't run on a hot day, the breaker trips, or — with welded contacts — the unit keeps running even after the thermostat is satisfied. Pitted, burned, or chattering contacts are the classic failure mode. This is a definite-purpose contactor rated for the compressor's locked-rotor and full-load amperage, with a 24V (often noted as 5Y-series) pull-in coil and heavy silver-alloy contacts sized to handle the inrush of your specific condenser. The pole count and coil voltage match this unit exactly. OEM matters for contactors because generic replacements frequently use undersized or lower-silver-content contacts that pit and arc faster, raising resistance until they overheat, weld shut, or drop out under load — shortening compressor life through voltage starvation. A genuine Carrier contactor matches the rated contact gap, coil pull-in voltage, and amperage so the compressor sees clean, full voltage every cycle. Install difficulty: 2 of 5. Tools: 1/4" and 5/16" nut drivers, a multimeter, and a phone to photograph the wiring. #1 safety warning: kill the disconnect and the breaker at the condenser before touching anything — these terminals carry 240V, and the run capacitor nearby can hold a lethal charge, so discharge it before working. Label each wire before removal. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model RSA1000L5Y. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $99
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Contactor fit my Carrier RSA1000L5Y?
Yes. This is the factory-specified OEM contactor for the Carrier RSA1000L5Y. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the contactor on my Carrier RSA1000L5Y?
Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.
My AC clicks but the compressor won’t turn on. What’s wrong?
Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.
Is this contactor compatible with Bryant or Payne too?
Many Carrier parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my Carrier contactor?
OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online