Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
OEM Carrier Definite Purpose 30A Contactor Relay for ROA1000L2H Unit
Carrier

OEM Carrier Definite Purpose 30A Contactor Relay for ROA1000L2H Unit

SKU: CARRIE-ROA1000L2H-CONTACTOR-HN53CD209 Brand: Carrier
Guaranteed to fit — or your money back. Terms

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

OEM Carrier Definite Purpose Contactor Relay for ROA1000L2H Unit

The contactor is the electrically controlled switch that feeds line voltage to the compressor and outdoor fan motor in your Carrier ROA1000L2H condensing unit. When the thermostat calls for cool, 24 volts energize the coil, the contacts snap closed, and the outdoor section comes alive. Switching on every cycle makes the contactor one of the fastest-wearing parts in the unit. Failure shows up as a buzzing or chattering condenser that won't start, an outdoor unit that stays silent while the blower runs indoors, short-cycling, or contacts welded closed so the compressor never shuts off. Pitted, scorched, or ant-infested contacts are the usual reason cooling suddenly quits. This is a definite-purpose contactor matched to the OEM spec for the ROA1000L2H. Check pole configuration (single- or double-pole), full-load amp rating (commonly 30A or 40A on residential condensers), and coil voltage (24VAC residential standard; 120V or 240V on some equipment) against the old part before installing. The silver-cadmium-oxide contacts are built for hundreds of thousands of make-break cycles. OEM matters because contact metallurgy and spring tension determine durability. Generic contactors tend to use thinner contact material and weaker springs that arc and pit early, raising resistance and producing heat that can melt the base and burn the wiring. A weak generic coil chatters under low control voltage, hammering the contacts and your compressor's start windings. The right OEM part is inexpensive protection for the costliest component you own. Install difficulty: 2 of 5. Tools: 1/4" and 5/16" nut drivers, a flat-blade screwdriver, needle-nose pliers, and a multimeter. SAFETY: shut off the outdoor disconnect AND the breaker before handling — the line side carries 240V even with the thermostat off. Photograph the wiring and move one wire at a time. Ships same business day from our stocked warehouse on orders before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model ROA1000L2H. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $99
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Contactor fit my Carrier ROA1000L2H Unit?
Yes. This is the factory-specified OEM contactor for the Carrier ROA1000L2H Unit. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the contactor on my Carrier ROA1000L2H Unit?
Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.
My AC clicks but the compressor won’t turn on. What’s wrong?
Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.
Is this contactor compatible with Bryant or Payne too?
Many Carrier parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my Carrier contactor?
OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online