OEM Carrier Air Pressure Switch for PY4GNAB42060NA Gas Furnace

The pressure switch is a safety device that confirms the draft inducer is moving combustion gases correctly before your PY4GNAB42060NA furnace is permitted to ignite. It senses the negative pressure the inducer creates; only when sufficient draft is proven does the switch close and let the control board energize the igniter and gas valve. When the switch fails or its hose/port clogs, the furnace won't fire — you'll see the inducer spin but get no ignition, repeated short-cycling, or a control board flashing a pressure switch fault code. A stuck-open switch causes hard lockouts; a stuck-closed switch is a dangerous safety bypass that should never be jumped. Specs: Genuine OEM single-stage pressure switch calibrated to the exact set point — measured in inches of water column ("W.C.) — specified for this furnace. The trip pressure is stamped on the switch body, and using the correct value is essential to safe operation. OEM vs Generic: Pressure switch calibration is not interchangeable. A generic switch with the wrong set point will either nuisance-trip and lock out a perfectly good furnace, or fail to detect a blocked flue — defeating the very safety function it exists for. OEM switches are matched to your furnace's inducer and venting design. Install: Difficulty 1 of 5. Tools: 1/4" nut driver and needle-nose pliers. SAFETY: Turn off the furnace breaker and gas before servicing. Never bypass or jumper a pressure switch to force the furnace to run — it is a flue-blockage and carbon monoxide safeguard. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PY4GNAB42060NA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.