OEM Carrier Hot Surface Igniter Replacement for PY4GEAB60130NA

The hot surface igniter is the ignition source for your Carrier PY4GEAB60130NA gas furnace. On each call for heat, the control board sends 120V to the igniter, which glows white-hot (roughly 2,000°F) and lights the gas at the burners. When the element cracks or degrades, the furnace tries to ignite, fails, and locks out — you'll notice no heat despite the blower running, repeated clicking from the control board, a 3- or 4-flash error code, or short-cycling where the unit starts and stops every few minutes. A chalky-white or visibly cracked element is a sure sign of failure. Specs: This is a silicon carbide hot surface igniter rated for 120VAC. A healthy silicon carbide element reads roughly 40–75 ohms cold; an open (infinite) reading confirms it has failed. Silicon carbide igniters reach full glow in about 17–34 seconds. The mounting bracket and dual-pin connector are sized to drop into the Carrier burner assembly without modification. OEM vs Generic: Igniters are brittle and tolerance-sensitive. A generic igniter with the wrong cold resistance won't glow hot enough to reliably light gas — causing nuisance lockouts — or draws too much current and burns out early. OEM silicon carbide elements are matched to your furnace's ignition timing and voltage, so they reach light-off temperature within the control board's trial-for-ignition window. Cheap aftermarket elements are thinner and crack from thermal cycling within a season or two. Install: Difficulty 2/5. Tools: 1/4" nut driver and multimeter. ⚠️ Turn off the gas and kill power at the furnace switch before servicing. Never touch the ceramic element with bare fingers — skin oil creates hot spots that crack it. Handle by the metal bracket only. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PY4GEAB60130NA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.