OEM Carrier Spark Electrode Ignitor 48VL400002 for Model PY4GEAB36060NA

This is the factory-authorized OEM spark electrode ignitor (part number 48VL400002), the direct factory replacement for the Carrier PY4GEAB36060NA packaged gas/electric unit. The spark electrode ignitor generates the high-voltage arc that lights the burner at the start of every heat call. When it fails, the control board detects no proof of flame and triggers a safety lockout — leaving you with a unit that attempts ignition, sparks weakly or not at all, then shuts down within seconds. Replacing the ignitor is one of the most common and cost-effective furnace repairs available.

• Part Specs: OEM part number 48VL400002 | Superseded/shipped as 50HJ403022 | L-shaped spark electrode design | Total assembly length: 2¾" | Country of origin: USA | Factory-matched gap and bracket geometry for drop-in fitment
• OEM vs Generic: This is a genuine Carrier Factory Authorized Part. OEM electrodes are manufactured to exact gap tolerances and ceramic insulator ratings. Generic igniters often use inferior ceramic that cracks under thermal cycling, causing intermittent no-heat callbacks.
• Install Difficulty: 2/5 — Turn off gas supply and 24V power before starting. Tools needed: 1/4" nut driver, needle-nose pliers. Photograph existing electrode wire routing before disconnecting. Ceramic tip is fragile — handle by the bracket only. Do not touch the electrode tip with bare hands.
• Warranty: 1-year OEM manufacturer warranty against defects. Ships same business day from our warehouse when ordered before 3:00 PM local time.

Compatibility: Designed for the Carrier PY4GEAB36060NA packaged gas/electric unit. Note that OEM part 48VL400002 is now fulfilled as superseding part number 50HJ403022 — same factory-spec electrode, updated part designation. Always verify your unit's data plate and existing electrode style before ordering. Our team is available to confirm fitment before you buy — order today and get same-day shipping!