OEM Carrier 2-Pole Condenser Contactor 30 Amp 24V for Model PY3PPA036090NA (HN52KC025)

This OEM Carrier condenser contactor is the factory-specified high-voltage relay for the Carrier PY3PPA036090NA packaged unit. The contactor acts as the primary power switch for the compressor and condenser fan, using a low-voltage 24V coil signal from the thermostat to close the high-voltage circuit and bring the system to life. When the contactor fails — due to burned or pitted contacts, a stuck plunger, or a failed coil — the system will fail to start, hum without cooling, or trip the breaker repeatedly. Replacing it is one of the most common and cost-effective AC repairs available.

• Specs: 2-Pole (Double Pole) | 30 Amp RES rating | 24VAC coil voltage | 50/60 Hz | 600V max switching voltage | Definite-purpose contactor
• OEM vs Generic: This OEM-grade contactor meets Carrier's exact coil pull-in voltage and contact material specs. Generic contactors often use lower silver-alloy content on contact tips, leading to faster pitting and premature failure — especially on high-cycling systems.
• Install difficulty: 2/5 — Always disconnect power at the breaker AND the disconnect box before beginning. Tools needed: flathead and Phillips screwdrivers, needle-nose pliers, multimeter. Photograph all wiring before disconnecting. The low-voltage (24V) wires and line-voltage (240V) wires must be kept separate and reconnected correctly.
• Warranty: 1-year OEM factory warranty. In stock and ships same business day from our warehouse.

Compatibility: Engineered as a direct OEM replacement for Carrier model PY3PPA036090NA packaged units. Part number HN52KC025 has been superseded by HN52KC024 — both are cross-compatible 2-pole 30A 24V contactors. Verify pole count, amperage, and coil voltage on your unit's data plate before ordering. Our team is available to confirm fitment before you buy.