OEM Carrier Condenser Fan Motor 1/8 HP 825 RPM for Model PY3PPA030040NA — Part #HC35GE235

This is the OEM factory-specified condenser fan motor for the Carrier PY3PPA030040NA split-system air conditioner. The condenser fan motor drives the outdoor fan blade to pull air across the condenser coil and reject heat from the refrigerant. When this motor fails, the outdoor unit will run with no fan movement, causing the compressor to trip on high-pressure lockout or overheat — often within minutes of startup. Common symptoms include the outdoor fan spinning slowly or not at all, the unit shutting off on a hot day, or a burning smell near the condenser cabinet.

• Specs: 1/8 HP | 825 RPM | 208-230 VAC | 60 Hz | 1-Phase | 0.90 Full Load Amps | PSC (Permanent Split Capacitor) motor type | Clockwise rotation | Shaft-down mount | Replaces GE Genteq 5KCP39FFS244CS and supersedes HC35GE235A
• OEM vs Generic: This is the genuine Carrier OEM motor — engineered to exact factory HP, RPM, and rotation specifications. Generic motors may carry slightly different shaft diameters, RPM tolerances, or rotation direction, risking blade incompatibility, reduced airflow, or premature failure.
• Install difficulty: 3/5 — Disconnect power and discharge any run capacitor before beginning. Tools needed: nut driver set, wire stripper, multimeter, and a blade puller (fan blade is press-fit). Always photograph wiring before disconnecting terminals. Replace the run capacitor at the same time — a weak capacitor is the #1 cause of PSC motor failure.
• Warranty: 1-year OEM factory warranty. Ships same business day from our warehouse when ordered before 3 PM local time.

Compatibility: Direct OEM replacement for Carrier model PY3PPA030040NA. Verify motor HP, RPM, voltage, rotation direction, and shaft diameter against your unit's data plate before ordering. Cross-references: HC35GE235A, GE Genteq 5KCP39FFS244CS. Need fitment confirmation? Our HVAC parts specialists are standing by — contact us before you order.