OEM Carrier Hot Surface Igniter for PY3PNA060130AB Gas Furnace

The hot surface igniter is the component that lights the gas burners on every heat call in your Carrier PY3PNA060130AB. When 24 volts reaches it, the silicon carbide element glows orange-hot — over 2,000°F — to ignite the gas as the valve opens. When an igniter cracks or weakens, you'll notice the furnace clicking and trying to light but producing no heat, short-cycling on the limit switch, or the blower pushing cold air. A failed igniter is the single most common no-heat call on modern Carrier package and gas furnaces. This is a genuine silicon carbide hot surface igniter built to Carrier's exact resistance spec (roughly 40–75 ohms cold). Silicon carbide elements are brittle and degrade with every ignition cycle, so a unit reading open or far outside spec on a multimeter must be replaced rather than cleaned. The mounting bracket and Molex connector match the factory part for a true drop-in fit. OEM matters here because aftermarket igniters often use lower-grade ceramic that runs cooler or cracks within a season, causing repeat no-heat failures and delayed-ignition 'whoomp' events that can crack the heat exchanger. A genuine element reaches full temperature inside the timing window the control board expects. Install difficulty: 2 of 5. Tools: 1/4" nut driver, gloves, and a multimeter to confirm the new element's resistance. SAFETY: shut off the gas and the 120V power at the breaker before servicing. Never touch the igniter element with bare fingers — skin oil creates hot spots that cause premature failure; handle it by the bracket only. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PY3PNA060130AB. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.