OEM Carrier Furnace Hot Surface Igniter Kit for PY3PNA024040NB

The hot surface igniter is the glowing ceramic element that ignites the gas burners in the furnace section of your Carrier PY3PNA024040NB packaged unit. When the thermostat calls for heat, the board powers the igniter until it glows white-hot, then opens the gas valve so the burners light off it. Because it endures extreme thermal cycling on every heat call, it is the number-one no-heat part. A failed igniter leaves you with an inducer that runs and a gas valve that may click, but no flame. The burners never light, you get cold air, and the board typically locks out after three retries on a cold day. This is a genuine OEM hot surface igniter using a silicon nitride element, which is tougher and far more thermal-shock- and impact-resistant than legacy silicon carbide igniters that crack at the slightest touch. Cold resistance generally falls in the 40 to 75 ohm range; an open (infinite) ohm reading across the leads confirms the element has failed. The factory connector, mounting bracket, and clearance over the burner orifice match Carrier spec for correct flame ignition. Correct resistance and element position drive glow temperature. A generic igniter with off-spec resistance under-glows, so gas accumulates before lighting and ignites with a hard whump that stresses the heat exchanger, or it never reaches ignition temperature. Brittle silicon carbide substitutes also fail far sooner. The OEM silicon nitride element holds correct temperature and burner clearance for clean, durable ignition. Install difficulty: 2 of 5. Tools: 1/4-inch nut driver or 5/16-inch socket and gloves. Do not touch the element with bare hands, since finger oils create hot spots that crack it. Safety: shut off the gas valve and disconnect electrical power before servicing. Unplug the lead, remove the mounting screw, and seat the new igniter without contacting the element. Ships same business day from our stocked warehouse on orders before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PY3PNA024040NB. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.