OEM Carrier Condenser Fan Motor 1/4 HP 460V 1100 RPM for Model PY3PEA060115NB
This OEM condenser fan motor is the factory-specified replacement for the Carrier PY3PEA060115NB split-system air conditioner. The condenser fan motor drives the outdoor fan blade to pull air across the condenser coil, dissipating heat from the refrigerant. When it fails, the outdoor unit runs but the fan does not spin — causing the compressor to overheat, trip its high-pressure limit, or short-cycle. Left unaddressed, a failed fan motor can lead to costly compressor damage.
-
Specs: 1/4 HP | 460/400V | 60/50 Hz | 1100/900 RPM | 0.7A | Single Phase | Closed Enclosure | CW Rotation | 1.5" Shaft | Frame 48Y (5 5/8" diameter)
-
OEM vs Generic: This is the genuine Carrier OEM motor (HC39GE468 / HC39GE468A) manufactured to exact factory tolerances. Generic aftermarket motors often deviate in RPM, rotation direction, or shaft diameter — risking fan blade imbalance, vibration, and early failure. OEM ensures a drop-in, no-modification fit.
-
Install difficulty: 3/5 — Disconnect and lock out power before servicing. Tools needed: 5/16" and 3/8" nut drivers, multimeter, wire crimpers, and a set (hub puller recommended for fan blade removal). Always photograph wiring and blade pitch angle before disassembly. It is strongly recommended to replace the run capacitor at the same time — a capacitor out of tolerance is a leading cause of premature motor failure.
-
Warranty: 1-year OEM manufacturer warranty against defects. Ships same business day from our warehouse when ordered before cutoff.
Compatibility: Fits Carrier model PY3PEA060115NB. Also cross-references to Bryant and Payne units sharing the HC39GE468 / HC39GE468A specification. Verify voltage (460V), HP (1/4), RPM (1100), and rotation (CW) against your unit's data plate before ordering. Need fitment confirmation? Our HVAC parts team verifies compatibility before you buy — order now and receive same-day shipping on all in-stock parts.