OEM Carrier Dual Run Capacitor for PY3PEA060115NA Package Unit

The run capacitor stores and releases the electrical charge that keeps your Carrier PY3PEA060115NA's compressor and condenser fan motor spinning efficiently. It provides the phase shift these single-phase motors need to run smoothly under load. When a capacitor weakens or fails, the symptoms are unmistakable: a loud humming from the outdoor unit with the fan not turning, a compressor that clicks and trips its overload, hard or delayed starts, warm air from the vents, and sometimes a tripped breaker. A bulged or leaking top on the capacitor can is a dead giveaway. This is a dual run capacitor (HERM + FAN terminals) rated for the PY3PEA platform — typically in the 35/5 to 45/5 MFD range at 370/440 VAC. Critically, this OEM part holds a tight ±5% capacitance tolerance, which keeps both motors operating in their designed efficiency window. Tolerance is exactly why OEM matters for capacitors. Many generic aftermarket caps carry ±10–15% tolerance and use lower-rated, shorter-life dielectric film. A capacitor that drifts even a few MFD out of spec forces the compressor windings to run hotter and draw more amperage, shortening compressor life — the single most expensive component in the system. The few dollars saved on a generic cap routinely cost a compressor. Install difficulty: 2/5. Tools needed: 1/4-inch nut driver, needle-nose pliers, a multimeter with capacitance mode, and a photo of the wiring. #1 safety warning: a capacitor stores a lethal charge — kill the breaker AND fully discharge the capacitor across its terminals with an insulated resistor before touching the wires. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PY3PEA060115NA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.