OEM Carrier Silicon Nitride Hot Surface Igniter for PY3PEA060115AB

The hot surface igniter lights the burners on your Carrier PY3PEA060115AB by glowing white-hot when the control board calls for heat. It is one of the most common no-heat failure points: igniters are brittle and degrade with every heating cycle until they crack or no longer reach ignition temperature. When it fails you will hear the inducer and gas valve cycle but get no flame, the furnace will lock out after several tries, and you will have cold air or no air. Many homeowners can see the old igniter has a visible crack or no longer glows orange through the inspection port. This is a silicon nitride hot surface igniter, more durable and shock-resistant than older silicon carbide elements, rated for 120V operation with a cold resistance typically in the 40-75 ohm range (verify against the old igniter). Silicon nitride tolerates more on/off cycles and resists the thermal-shock cracking that kills carbide igniters. Why OEM matters: a correct Carrier igniter has the right resistance, glow temperature, and mounting geometry to sit precisely at the burner. Generic igniters with the wrong resistance may never reach ignition temperature (no light) or run too hot and burn out early; wrong placement causes delayed ignition and rough lightoff that stresses the heat exchanger. Installation difficulty: 2 of 5. Tools: a 1/4-inch nut driver and a multimeter to confirm resistance. THE #1 SAFETY RULE: turn off the gas and kill the breaker before servicing, and NEVER touch the igniter element with bare fingers, because skin oils create hot spots that crack the ceramic. Handle it only by the ceramic base. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PY3PEA060115AB. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.