OEM Carrier Condenser Fan Motor 1/4 HP 460V for Model PY3PEA048115NB

This genuine OEM condenser fan motor is the factory-specified replacement for the Carrier PY3PEA048115NB condensing unit. The condenser fan motor drives the outdoor fan blade, pulling ambient air across the condenser coil to dissipate heat from the refrigerant. When this motor fails, the outdoor unit overheats, the high-pressure limit trips, and the system shuts down — leaving you with a no-cool call. Common failure symptoms include the outdoor fan not spinning, the unit cycling off on high pressure, or a humming motor that won't start even with a good capacitor.

• Specs: 1/4 HP | 1100/900 RPM (60/50 Hz) | 460/400 Volts | 0.70 Amps | Single Phase | 48Y Frame | 1.5" Shaft Diameter | Clockwise Rotation (shaft end) | Closed Enclosure
• OEM vs Generic: This is a genuine Carrier Factory Authorized Part (FAP), engineered to exact factory tolerances. OEM motors are validated for correct airflow, RPM, and sound levels specific to the PY3PEA048115NB cabinet geometry. Generic motors risk mismatched RPM, reduced airflow, and premature failure.
• Install difficulty: 3/5 — Disconnect and lock out 460V power before starting. Tools needed: multimeter, nut driver set, wire stripper, needle-nose pliers. Always photograph the original wiring and note rotation direction before removing the old motor. Recommend replacing the run capacitor at the same time.
• Warranty: 1-year OEM manufacturer warranty. In stock — ships same business day from our warehouse.

Compatibility: Factory-matched replacement for Carrier model PY3PEA048115NB. Also cross-references GE/Genteq model 5KCP39KFV110AS and production numbers 3242431 001005 and 5KCP39MFS303BS. Verify voltage (460V — commercial/light commercial application) and rotation on your unit's data plate before ordering. Not for standard 208-230V residential applications. Questions about fitment? Our parts team confirms compatibility before you buy.