OEM Carrier Hot Surface Igniter for PY3PEA036060NB Gas Furnace

The hot surface igniter in your Carrier PY3PEA036060NB is what lights the burners on every call for heat. When the thermostat calls, the control board sends line voltage to the igniter, which glows white-hot within seconds and ignites the gas as the valve opens. Igniters are the most common no-heat failure in modern furnaces: the brittle element develops hairline cracks from thousands of heat cycles and finally breaks. When it fails you'll hear the inducer and blower run and the gas valve click, but get no flame, no warm air, and often a control board fault code for failed ignition or a lockout after three tries. This is a 120V hot surface igniter. Carrier furnaces of this generation use a durable silicon nitride element rather than the older, more fragile silicon carbide design — silicon nitride resists thermal shock and contamination far better and reads a cold resistance in roughly the 40–75 ohm range (an open/infinite reading means it is dead). The OEM mounting bracket sets the element at the correct depth in the burner. OEM matters because resistance and placement are tuned to this furnace. A generic igniter with the wrong resistance won't reach full ignition temperature, leading to delayed lights, rollout, or repeated lockouts; a cheaper silicon carbide replacement tends to crack again within a season or two. Install difficulty: 2 of 5. Tools needed: 1/4" nut driver and a multimeter. #1 safety warning: turn off the gas supply and kill power at the furnace disconnect first, and never touch the igniter element with bare fingers — skin oil creates hot spots that shorten its life. Ships same business day from our stocked warehouse on orders before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PY3PEA036060NB. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.