OEM Carrier Hot Surface Igniter for PY3PEA036060NA Gas Furnace

The hot surface igniter in your Carrier PY3PEA036060NA is the component that lights the gas burners on every heat cycle. On a call for heat, the control board applies line voltage to the igniter, which glows white-hot in a few seconds and ignites the gas as the valve opens. Because the element heats and cools thousands of times per season, it is the single most common cause of a no-heat furnace: tiny stress cracks form until the element finally fails open. When that happens you'll hear the inducer and blower run and the gas valve click, but get no flame, no warm air, and frequently a flashing fault code indicating failed ignition or a three-strike lockout. This is a 120V hot surface igniter built around a silicon nitride element, the more robust modern alternative to fragile silicon carbide. Silicon nitride shrugs off thermal shock and surface contamination and measures a cold resistance in roughly the 40–75 ohm range; an infinite (open) reading confirms a dead igniter. The OEM bracket positions the element at the precise factory depth in the burner box. OEM matters because both resistance and geometry are matched to this furnace. A generic igniter with the wrong resistance may never reach full ignition temperature, causing delayed ignition, flame rollout, or chronic lockouts, while a budget silicon carbide unit will likely crack again within a year. Install difficulty: 2 of 5. Tools needed: 1/4" nut driver and a multimeter. #1 safety warning: shut off the gas supply and kill power at the furnace disconnect before starting, and never handle the igniter element with bare fingers — skin oils create hot spots that lead to early failure. Ships same business day from our stocked warehouse on orders before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PY3PEA036060NA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.