OEM Carrier 2-Pole Contactor 30 Amp 24V Coil for Model PY3PEA036060NA (Replaces HN52KC025)

This OEM contactor is the factory-specified replacement for the Carrier PY3PEA036060NA split-system air conditioner. The contactor is a high-voltage relay that acts as the main power switch for your compressor and condenser fan motor. When the thermostat calls for cooling, a low-voltage 24V coil energizes and closes the high-voltage contacts, allowing 240V power to flow to the compressor. When the contactor fails — due to worn contact points, a burned coil, or pitted contacts — the AC unit will fail to start, short-cycle, or run continuously without cooling. Replacing a faulty contactor is one of the most common and cost-effective HVAC repairs available.

• Specs: 2-Pole (Double Pole) | 30 Amp FLA | 24V AC Coil | 240V Load Circuit | OEM Part HN52KC025 (current OEM successor: HN52KC024)
• OEM vs Generic: OEM contactors are wound and rated to exact factory tolerances, ensuring reliable coil pull-in voltage and contact life. Generic contactors often use lower-grade silver alloy contacts that pit and weld faster, leading to premature compressor failure.
• Install Difficulty: 2/5 — Always disconnect power at the breaker and discharge any residual voltage before working in the disconnect box. Tools needed: flathead and Phillips screwdrivers, needle-nose pliers, voltage tester. Photograph all wire connections before removing the old contactor.
• Warranty: 1-year OEM factory warranty. In stock and ships same business day from our warehouse.

Compatibility: Designed for the Carrier PY3PEA036060NA split-system air conditioner. This part also cross-references to Bryant and Payne equipment using the same 2-pole 30 Amp 24V contactor specification. Always verify your unit's data plate amperage and coil voltage before ordering. Our HVAC parts specialists are available to confirm fitment before you buy.