OEM Carrier Flame Sensor (48GS400192) for Model PY3PEA036060AA

This is the genuine OEM Carrier flame sensor, part number 48GS400192, factory-specified for the Carrier PY3PEA036060AA gas furnace. The flame sensor is a critical safety component — it uses electrical ionization to detect whether a burner flame is present after ignition. When it fails or becomes coated with oxidation buildup, the furnace control board cannot confirm combustion and will shut down the gas valve within 5–8 seconds as a safety precaution, resulting in a lockout fault. The fix is almost always a simple cleaning or direct replacement of this sensor rod.

• Specs: 90-degree mounting bracket | Flame rod sensor with lead wire | Factory-matched ionization signal output | Approximate dimensions: 4.9" L × 1.75" H × 1.6" W
• OEM vs Generic: This is the genuine Carrier OEM part — not an aftermarket substitute. OEM sensors meet exact ionization signal specifications required by the control board. Generic sensors can produce erratic microamp readings, causing nuisance shutdowns or masking real safety issues.
• Install difficulty: 1/5 — One of the simplest furnace repairs. Tools needed: 1/4" hex driver or nut driver, needle-nose pliers. Always shut off power and gas before servicing. Disconnect the lead wire, remove the single mounting screw, swap the sensor, and reconnect. Clean the burner flame port while you're in there.
• Warranty: 1-year OEM manufacturer warranty against defects. Ships same business day from our warehouse — order by 3 PM local time.

Compatibility: Designed for the Carrier PY3PEA036060AA gas furnace. Verify OEM part number 48GS400192 against your unit's data plate or existing sensor before ordering. Our fitment team is available to confirm compatibility before you buy — no guesswork required.