Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
OEM Carrier Contactor for PY3PEA036060AA Heat Pump Condenser
Carrier

OEM Carrier Contactor for PY3PEA036060AA Heat Pump Condenser

SKU: CARRIE-PY3PEA036060AA-CONTACTOR-HN52KC025 Brand: Carrier
Guaranteed to fit — or your money back. Terms

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

OEM Carrier Contactor for PY3PEA036060AA Heat Pump Condenser

The contactor is the high-voltage relay that switches line power to your Carrier PY3PEA036060AA's compressor and condenser fan motor every time the thermostat calls for cooling. A low-voltage 24V signal energizes the coil, pulling the contacts closed so 240V can reach the outdoor unit. When a contactor fails you'll often hear a loud hum or chatter from the condenser, see the fan struggle to start, or get no outdoor operation at all while the indoor blower keeps running. Pitted or welded contacts can also leave the compressor energized after the thermostat is satisfied, causing the unit to run nonstop and freeze the coil. Specs: This is a definite-purpose contactor with a 24V coil and contacts rated for the compressor and fan FLA/LRA of this packaged unit. OEM contactors use silver-alloy contact pads and a properly sized coil so the unit pulls in cleanly and holds without buzzing. Confirm pole count (single vs. double-pole) and amp rating against the old part before installing. OEM vs Generic: OEM matters here because undersized aftermarket contacts pit and arc faster under the inrush of compressor start-up, and a weak generic coil can drop out under low voltage, chattering and burning the points. That arcing welds contacts closed — the #1 cause of a compressor that won't shut off. The correctly rated Carrier part holds full load for years. Install: Difficulty 2/5. Tools: 1/4" and 5/16" nut drivers, needle-nose pliers, and a multimeter. SAFETY: kill the disconnect at the outdoor unit AND the breaker before touching anything — line voltage is present even with the thermostat off. Photograph the wiring before removing leads. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PY3PEA036060AA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $99
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Contactor fit my Carrier PY3PEA036060AA Heat Pump Condenser?
Yes. This is the factory-specified OEM contactor for the Carrier PY3PEA036060AA Heat Pump Condenser. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the contactor on my Carrier PY3PEA036060AA Heat Pump Condenser?
Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.
My AC clicks but the compressor won’t turn on. What’s wrong?
Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.
Is this contactor compatible with Bryant or Payne too?
Many Carrier parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my Carrier contactor?
OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online