OEM Carrier Silicon Nitride Hot Surface Igniter for PY3GNAA30060NA

The hot surface igniter is the component that physically lights the gas at every burner startup. A 120V current heats its element to over 2,000°F, glowing bright orange so it can ignite the gas as the valve opens. When an igniter fails or develops hairline cracks, your furnace simply won't produce heat: you'll hear the inducer motor spin up and the gas valve click, but the burners never light. Common symptoms are no heat on a call for heat, repeated ignition lockouts (the board tries 3-5 times then shuts down), short bursts of cold air from the registers, or a furnace that fires intermittently on cold mornings. This is a silicon nitride element rated for 120VAC. Silicon nitride is far more durable and thermal-shock resistant than older silicon carbide igniters, which are brittle and crack from repeated heating cycles. A healthy igniter reads roughly 40-75 ohms cold on a multimeter; an open or wildly out-of-spec reading confirms a failed unit. This OEM part matches Carrier's exact mounting bracket, gasket, and connector so it seats correctly in the burner assembly. Why OEM matters here: generic igniters often use lower-grade ceramic and looser resistance tolerances, so they don't reach ignition temperature reliably and crack within a season. A unit that won't glow hot enough causes nuisance lockouts and premature failure. OEM silicon nitride delivers the correct resistance and consistent glow temperature your control board expects. Install difficulty: 2 of 5. Tools: 1/4" nut driver, Phillips screwdriver, and a multimeter to verify. #1 safety warning: shut off both the gas supply and electrical power at the breaker before servicing, and never touch the ceramic element with bare fingers — skin oils create hot spots that crack it. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PY3GNAA30060NA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.