OEM Carrier Silicon Nitride Hot Surface Igniter for PY3GNAA24060NA

The hot surface igniter is the glow element that lights the burners in your Carrier PY3GNAA24060NA. On each heat call the control board sends voltage to the igniter, it glows white-hot, and the gas valve opens to ignite the burner flame. Igniters are the single most common no-heat failure: when one cracks or burns out you'll get cold air from the registers, the inducer and blower will cycle without ignition, and the furnace will lock out after three to five failed tries—often with a flashing fault code. You may hear the gas valve click without the usual 'whoomp' of ignition, and a visibly cracked or white-crusted element is a dead giveaway. This OEM igniter is supplied in the correct element material and resistance for your furnace. Silicon nitride elements—the modern Carrier standard—are far more durable and thermal-shock resistant than the older brittle silicon carbide style, with a cold resistance typically in the 40–75 ohm range (versus 11–22 ohms for carbide) that must match what the board expects to glow at the right temperature. Why OEM matters here: a generic igniter with the wrong resistance won't reach full glow temperature, so the gas valve opens onto a too-cool element and ignition fails or delays, causing rough lights and lockouts. Off-spec silicon carbide elements also crack from the thermal shock of repeated cycling. The OEM nitride element is matched to the board's voltage and timing. Install difficulty: 2/5. Tools: 1/4" nut driver and clean gloves—never touch the element with bare fingers, as skin oil causes hot-spot failure. #1 safety warning: TURN OFF THE GAS and kill the furnace breaker before servicing. Handle the new igniter only by its ceramic base. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PY3GNAA24060NA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.