OEM Carrier Silicon Nitride Hot Surface Igniter for PY3GNA036060NA

The hot surface igniter physically lights your Carrier furnace. On each call for heat the control board sends 120V to the igniter, which glows white-hot — well over 2,000°F — to ignite the gas as the valve opens. It is the single most common furnace failure part because the element is brittle and degrades with every thermal cycle. When it fails you get no heat, a furnace that runs the inducer and clicks the gas valve but never lights, or a unit that locks out after three failed ignition attempts. A bad igniter often shows a visible crack in the element or simply stops glowing. This OEM Carrier igniter uses a silicon nitride element rather than the older, more fragile silicon carbide design. Silicon nitride resists thermal shock and handling far better, with a typical cold resistance in the 40–75 ohm range that matches your control board's current-sensing circuit. Correct resistance is critical — it determines how hot the element glows and whether the board reads the igniter as healthy. Why OEM matters: generic igniters often ship with the wrong resistance or a thinner element. Too high a resistance and it won't reach ignition temperature, leaving intermittent no-heat calls; too low and it draws excess current that can damage the board's igniter relay. An OEM-spec part glows to the exact temperature and timing your furnace expects. Install difficulty: 2 of 5. Tools needed: 1/4" nut driver, Phillips screwdriver, and gloves — never touch the element with bare fingers, as skin oils create hot spots that crack it. #1 safety warning: shut off the gas supply and kill the furnace breaker before removing the old igniter. Ships same business day from our stocked warehouse on orders before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PY3GNA036060NA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.