OEM Carrier Hot Surface Igniter for PY3GNA024060AB Gas Furnace

The hot surface igniter is the component that physically lights your furnace's gas burners. On each call for heat the control board energizes the igniter, it glows incandescent in seconds, and the gas valve opens onto the hot element to ignite the burner. Because it cycles through extreme thermal expansion every run, it is one of the most failure-prone parts in the system. When it cracks or burns through, you get no heat at all: the inducer and igniter sequence runs, but the burners never light, the gas valve closes, and after a few retries the board locks out. Homeowners often report a furnace that hums and clicks but blows cold, or a unit that worked the night before and is dead by morning. This OEM igniter is silicon nitride — far more durable and impact-resistant than the brittle silicon carbide elements used in many older designs and cheap aftermarket parts. Cold resistance typically reads in the 40–75 ohm range on a multimeter; an open (infinite ohms) reading confirms a failed element. It is matched to the furnace's 120V ignition circuit and original mounting bracket and gasket position. Why OEM matters here: igniters with the wrong resistance or element material either fail to reach ignition temperature (causing no-light lockouts) or run too hot and self-destruct in a season. Silicon nitride also tolerates the handling and vibration that snap generic silicon carbide tips. Install difficulty: 2 of 5. Tools: 1/4" nut driver, multimeter for the resistance check, and clean gloves — never touch the element with bare fingers, as skin oils create hot spots. #1 safety warning: turn off the gas supply and shut power at the breaker before servicing the burner assembly. Ships same business day from our stocked warehouse on orders before 3 PM CST. 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PY3GNA024060AB. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.