OEM Carrier Furnace Air Pressure Switch for Model PY2PPB060115AA

The air pressure switch is the safety device that confirms your Carrier PY2PPB060115AA inducer motor is actually pulling proper draft before the control board allows the burners to fire. It senses the negative pressure created by the inducer through a small hose; only when that vacuum reaches the calibrated set point do its contacts close and let ignition proceed. When the switch fails or the venting is blocked, the furnace runs the inducer, then hangs and refuses to light — homeowners notice the draft motor spinning with no flame, repeated retries, and finally a hard lockout with a pressure-switch error code. A stuck-closed switch is even more dangerous because it can allow firing without adequate venting. This is a single-stage negative-pressure (vacuum) switch with a factory-calibrated set point measured in inches of water column, matched to the inducer airflow and vent design of the PY2PPB060115AA. The exact "W.C." rating stamped on the switch body is what makes it model-specific. OEM matters because the set point is everything. A generic switch with a slightly different W.C. trip point will either nuisance-trip on a perfectly good draft or, worse, close too early and permit ignition with marginal venting — a combustion-safety risk. The genuine Carrier switch is calibrated to the furnace's engineered draft. Install difficulty: 2 of 5. Tools: 1/4" nut driver, Phillips screwdriver, and a manometer or multimeter to verify the switch closes on a call. #1 safety warning: turn off the furnace breaker and shut the gas supply before working near the burner and inducer assembly; inspect the hose for moisture or cracks while you're in there. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PY2PPB060115AA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.