OEM Carrier Hot Surface Igniter for Furnace Model PY2PPB060090AB

The hot surface igniter is what lights the gas at the start of every heating cycle in your Carrier PY2PPB060090AB furnace. When the thermostat calls for heat, the control board sends 120V to the igniter, which glows white-hot and ignites the burners. When it fails, the most common result is no heat: the inducer runs and the gas valve clicks, but the burners never light and the furnace goes into ignition lockout after three failed tries. Homeowners usually notice cold air from the vents, the furnace clicking and short-cycling, or a blinking diagnostic LED (often three or four flashes). A cracked igniter is the number-one no-heat failure on this furnace. Specs: This is a 120V hot surface igniter using a silicon carbide element. OEM units read roughly 40–75 ohms cold — verify with a multimeter; an open (infinite) reading confirms a cracked element that must be replaced. The mounting bracket and two-pin Molex connector match the factory footprint for a true drop-in fit. OEM matters because silicon carbide igniters are brittle and resistance-sensitive. Cheap aftermarket igniters often have out-of-spec resistance or thinner elements that fail to reach ignition temperature, causing intermittent lockouts, or that shatter within a season. The genuine part is matched to the board's output current for dependable light-off every cycle. Install difficulty: 2/5. Tools: 1/4" nut driver, Phillips screwdriver, and gloves — never touch the element with bare hands, since skin oils create hot spots that cause early failure. Safety: shut off the gas and kill power at the furnace switch before servicing. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PY2PPB060090AB. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.