OEM Carrier 2-Pole Contactor 30 Amp 24V (HN52KC025) for Model PY2PPB060090AB

This is the OEM factory-specified 2-pole contactor for the Carrier PY2PPB060090AB packaged gas/electric unit. The contactor is the high-voltage switching relay that energizes your compressor and condenser fan motor every time a call for cooling is made from the thermostat. When it fails, the most common symptoms are an AC system that won't turn on at all, a unit that hums without starting, or — equally dangerous — a system that won't shut off even after the thermostat is satisfied. Pitted, burned, or stuck contacts are the leading cause of compressor failure, making timely contactor replacement one of the highest-value preventive maintenance steps you can perform.

• Specs: 2-Pole | 30 Amp FLA | 24V AC coil | 50/60 Hz | Direct OEM replacement for part number HN52KC025 (superseded by HN52KC024)
• OEM vs Generic: OEM contactors use factory-rated silver-alloy contact tips rated to exact amp tolerances. Generic contactors frequently use lower-grade alloys that pit and weld faster under high-cycle residential loads, increasing compressor risk.
• Install Difficulty: 2/5 — Shut off power at the disconnect and verify zero voltage with a multimeter before touching any terminals. Tools needed: flathead and Phillips screwdrivers, needle-nose pliers, multimeter. Photograph all wiring connections before removal. Standard drop-in replacement with no re-wiring required.
• Warranty: 1-year OEM manufacturer warranty. Ships same business day from our warehouse when ordered before cutoff.

Compatibility: Engineered for the Carrier PY2PPB060090AB packaged unit. This contactor is also used across a wide range of Carrier, Bryant, and Payne equipment sharing the same 2-pole 30A 24V specification — always verify against your unit's data plate before ordering. Our team is available to confirm fitment prior to purchase. Order now and receive same-day shipping on all in-stock units.