OEM Carrier Condenser Fan Motor 1/4 HP 208-230V 1100 RPM for Model PY2PPB048130AB

This is the OEM factory-specified condenser fan motor (part number HC39GR234) for the Carrier PY2PPB048130AB packaged heat pump unit. The condenser fan motor drives the outdoor fan blade, expelling heat from the refrigerant coil and maintaining proper system pressure. When this motor fails, symptoms include the outdoor unit overheating and tripping on high-pressure lockout, the condenser fan not spinning while the compressor runs, or the motor humming without rotation due to a seized bearing or open winding.

• Specs: 1/4 HP | 208-230V | 1-Phase | 1100 RPM | 1.5 Amps | 60 Hz | Frame 48 | 1/2" Shaft Diameter | 1.5" Shaft Length | CWLE Rotation | Vertical Mount Only
• OEM vs Generic: This OEM Carrier motor is factory-matched to the exact HP, RPM, and rotation direction required by the PY2PPB048130AB. Generic motors often carry ±10% tolerance on RPM and amperage, risking coil freeze-up or condenser overheating. Always verify rotation direction and shaft specs before substituting.
• Install Difficulty: 3/5 — Disconnect and lock out power before beginning. Tools needed: multimeter, 5/16" and 1/4" nut drivers, adjustable wrench, and fan blade puller. Photograph all wiring before disconnecting. Tip: always replace the run capacitor at the same time — a weak capacitor is a leading cause of premature motor failure.
• Warranty: 1-year OEM factory warranty. In stock and ships same business day from our warehouse.

Compatibility: Engineered specifically for the Carrier PY2PPB048130AB 4-ton packaged heat pump unit. Verify horsepower, voltage, RPM, and rotation direction on your unit's data plate before ordering. Our HVAC parts specialists are available to confirm fitment — contact us before you order if you have any questions.