OEM Carrier Condenser Fan Motor 1/4 HP 208-230V 1100 RPM for Model PY2PPB048130AA

This is the factory OEM condenser fan motor for the Carrier PY2PPB048130AA packaged unit, sold under Carrier part number HC39GR234. The condenser fan motor drives the outdoor fan blade, pulling ambient air across the condenser coil to reject heat from the refrigerant. When this motor fails, the condenser coil overheats, triggering high-pressure lockout — your system will shut down within minutes of starting, or may not start at all. You may also notice the outdoor fan blade spinning slowly, wobbling, or not moving while the compressor is running and humming.

• Specs: 1/4 HP | 208-230V | 1-Phase | 1100 RPM | 1.5 Amps | 60 Hz | Frame 48 | 0.5" Shaft Diameter | 1.5" Shaft Length | CWLE Rotation | Vertical Mount Only
• OEM vs Generic: This OEM motor is factory-matched to exact speed, torque, and rotation specifications for the PY2PPB048130AA. Generic motors often deviate in RPM and rotation direction, causing airflow shortfalls, excessive vibration, and premature bearing failure.
• Install difficulty: 3/5 — Requires disconnecting 208-230V power at the breaker and verifying wiring orientation before removal. Tools needed: nut driver set, wire strippers, multimeter, and a blade puller. Always verify rotation (CWLE) and photograph existing wiring before disconnecting. It is strongly recommended to replace the run capacitor at the same time — an out-of-tolerance capacitor is the leading cause of premature motor failure.
• Warranty: 1-year OEM factory warranty. Ships same business day from our warehouse.

Compatibility: Designed as a direct OEM replacement for the Carrier PY2PPB048130AA packaged unit. Verify horsepower, voltage, RPM, and shaft dimensions against your unit's data plate before ordering. Our HVAC parts specialists are available to verify fitment — order with confidence and get your system back online fast.