OEM Carrier Condenser Fan Motor 1/8 HP 825 RPM for Model PY2PPB036090AA (HC35GE235)

This is the genuine OEM replacement condenser fan motor for the Carrier PY2PPB036090AA packaged unit, factory part number HC35GE235. The condenser fan motor drives the outdoor fan blade to pull air across the condenser coil, rejecting heat from the refrigerant circuit. When this motor fails, the condenser cannot dissipate heat — causing the compressor to trip on high-pressure lockout, the system to short-cycle, or the unit to shut down entirely with no cooling output. Common failure signs include the outdoor fan failing to spin at startup, the unit running briefly then cutting off, or visible overheating at the condenser cabinet.

• Specs: 1/8 HP | 825 RPM | 208-230 VAC | 60 Hz | Single Phase | 0.90 FLA | PSC (Permanent Split Capacitor) motor type | Clockwise rotation | Shaft-down mount | Replaces GE Genteq 5KCP39FFS244CS and HC35GE235A
• OEM vs Generic: This factory-authorized OEM motor is wound to exact Carrier specifications for torque curve, thermal protection trip point, and shaft tolerance. Aftermarket motors often deviate in RPM and amp draw, shortening compressor life and voiding equipment warranties.
• Install difficulty: 3/5 — Requires disconnecting high-voltage power and safely discharging any run capacitor before removal. Tools needed: multimeter, nut driver set, wire stripper, needle-nose pliers, and a blade-puller or hub puller for the fan blade. Always photograph all wiring before disconnecting terminals, and replace the run capacitor while the unit is open.
• Warranty & Shipping: 1-year OEM factory warranty. In-stock units ship same business day from our warehouse — get your system back online fast.

Compatibility: Engineered as the factory-specified replacement for Carrier PY2PPB036090AA packaged units. Cross-references OEM part HC35GE235A and GE Genteq 5KCP39FFS244CS. Verify horsepower, RPM, voltage, and rotation direction on your unit's data plate before ordering. Our HVAC parts specialists are available to confirm fitment before you buy.