OEM Carrier 2-Pole Contactor 30 Amp 24V Coil for Model PY2PPB030060AB — HN52KC025

This OEM 2-pole contactor is the factory-specified replacement for the Carrier PY2PPB030060AB packaged unit. The contactor acts as the high-voltage relay that receives a 24V signal from the thermostat or control board and switches line-voltage power (240V) to the compressor and condenser fan motor. When a contactor fails, the most common symptom is an AC system that simply won't turn on — the unit may hum at the contactor but the compressor and fan remain dead. Worn or pitted contacts can also cause intermittent operation, hard starting, or premature compressor failure.

• Specs: 2-Pole (Double Pole) | 30 Amp RES / 20 Amp FLA | 24VAC coil voltage | 50/60Hz | Tyco Electronics platform — factory-matched for Carrier equipment
• OEM vs Generic: OEM contactors use silver-alloy contact tips rated to factory tolerances, delivering consistent arc suppression and longer service life. Generic units often use lower-grade contact materials that pit and weld prematurely, risking compressor damage.
• Install Difficulty: 2/5 — Shut off all power at the disconnect and breaker before proceeding. Tools needed: flathead and Phillips screwdrivers, needle-nose pliers, multimeter. Always photograph wiring connections before removing the old contactor. Discharge any capacitors in the panel before working nearby.
• Warranty: 1-year OEM factory warranty. In stock and ships same business day from our warehouse.

Compatibility: Designed for the Carrier PY2PPB030060AB packaged unit. Note: OEM part number HN52KC025 has been superseded by HN52KC024 — this listing ships the current factory-authorized replacement. Also fits many Carrier, Bryant, and Payne systems using a 2-pole 30A 24V contactor. Verify pole count, amperage, and coil voltage against your unit's wiring diagram before ordering. Our team is available to confirm fitment before you buy.