OEM Carrier Condenser Fan Motor 1/8 HP 825 RPM for Model PY2PPB030040AA

This OEM condenser fan motor (part #HC35GE235) is the factory-specified replacement for Carrier model PY2PPB030040AA packaged units. The condenser fan motor drives the outdoor fan blade to expel heat from the refrigerant through the condenser coil. When this motor fails, the outdoor fan stops spinning, causing the compressor to overheat, triggering high-pressure lockout, or causing the unit to shut down entirely on thermal overload. Common symptoms include the outdoor fan not running, the unit short-cycling, or a burning smell near the condenser section.

• Specs: 1/8 HP | 825 RPM | 208–230 VAC | 1-Phase | 60 Hz | 0.90 Full Load Amps | PSC (Permanent Split Capacitor) motor type | Clockwise rotation | Shaft-down mount | Replaces GE/Genteq 5KCP39FFS244CS
• OEM vs Generic: This is a genuine OEM Carrier part manufactured to exact factory tolerances for torque, thermal protection, and RPM stability. Generic motors often deviate in rotation, shaft diameter, or RPM, leading to premature failure, improper airflow, and potential compressor damage.
• Install difficulty: 3/5 — Disconnect all power and lock out the unit before beginning. Tools needed: nut driver set, wire stripper, multimeter, and fan blade puller (recommended). Always photograph wiring connections before removal. Replace the run capacitor at the same time — a weak capacitor is the #1 cause of motor burnout.
• Warranty: 1-year OEM factory warranty against defects. Ships same business day from our warehouse when ordered before cutoff.

Compatibility: Designed for Carrier model PY2PPB030040AA packaged units. Verify your unit's data plate shows 1/8 HP, 825 RPM, and 208–230V before ordering. Cross-references: HC35GE235A, GE/Genteq 5KCP39FFS244CS. Questions about fitment? Our HVAC parts specialists verify compatibility before you order — call or chat today.