OEM Carrier Hot Surface Igniter for PY2PNB060115NB Gas Furnace

The hot surface igniter is the first component to fire in your Carrier PY2PNB060115NB furnace's heating sequence. When the thermostat calls for heat, the control board energizes this element and it glows white-hot, lighting the gas as it sweeps across the burners. When it fails you'll notice the blower runs but no warm air comes out, or you'll hear repeated clicking as the furnace tries and fails to light. A cracked or worn igniter often glows for a few seconds, then drops the unit into lockout — the furnace short-cycles, the diagnostic LED flashes an ignition-fault code, and the home never reaches temperature. This is a silicon nitride hot surface igniter, the modern upgrade over brittle silicon carbide elements. Silicon nitride shrugs off thermal shock and burner-box vibration far better, with typical cold resistance in the 40–75 ohm range and a rated life several times longer than legacy carbide. It reaches full glow temperature (roughly 2,000°F) inside the control board's trial-for-ignition window. Igniter resistance must land inside the board's expected band. Generic aftermarket igniters often ship with wider tolerances or thinner elements; one that reads too high won't glow hot enough to light gas reliably, causing ignition retries and premature lockouts, while one with the wrong mounting geometry sits too far from the burner. A genuine Carrier igniter matches the original resistance, glow time, and bracket position exactly. Install difficulty: 2 of 5. Tools: 1/4" nut driver, a Phillips screwdriver, and a multimeter to confirm resistance on the old part. #1 safety warning: shut off the gas supply and kill power at the furnace disconnect before servicing, and never touch the ceramic element with bare fingers — skin oil creates hot spots that crack it. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PY2PNB060115NB. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.