OEM Carrier Hot Surface Igniter for PY2PNB060115AB Gas Furnace

The hot surface igniter starts every heating cycle in your Carrier PY2PNB060115AB furnace. On a call for heat the control board sends voltage to this element, which glows white-hot and ignites the gas streaming across the burners. A failed igniter is one of the most common no-heat causes: the blower may run with only cold air, you'll hear repeated clicking or inducer cycling, and the unit drops into lockout after a few failed trials. A cracked element sometimes glows briefly, then breaks the circuit — leaving the furnace short-cycling while the diagnostic LED flashes an ignition-fault code. This is a silicon nitride hot surface igniter, a major durability improvement over older silicon carbide designs. Silicon nitride withstands repeated thermal cycling and burner vibration that crack carbide elements, with typical cold resistance in the 40–75 ohm range and a substantially longer rated service life. It is built to hit full glow temperature (around 2,000°F) within the board's trial-for-ignition timing. Why OEM matters: the igniter's resistance must sit inside the control board's expected band. Generic igniters often carry wider tolerances or thinner ceramic; one reading too high won't reach ignition temperature and triggers retries and lockouts, while incorrect bracket geometry positions the element wrong relative to the burner. A genuine Carrier igniter reproduces the exact resistance, glow time, and mounting position. Install difficulty: 2 of 5. Tools: 1/4" nut driver, Phillips screwdriver, and a multimeter to read resistance on the old igniter. #1 safety warning: shut off the gas supply and kill power at the furnace disconnect before servicing, and never handle the ceramic with bare fingers — skin oils create hot spots that crack the element. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PY2PNB060115AB. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.