OEM Carrier Condenser Fan Motor 1/4 HP 208-230V 1100 RPM — HC39GR234 for Model PY2PNB048130AB

This OEM condenser fan motor is the factory-specified replacement part HC39GR234 for the Carrier PY2PNB048130AB split-system air conditioner. The condenser fan motor drives the outdoor fan blade, pulling air across the condenser coil to dissipate heat and keep the refrigerant cycle running efficiently. When the motor fails, the condenser cannot shed heat — leading to high-pressure lockouts, compressor overheating, and complete system shutdown. Common failure symptoms include the outdoor fan not spinning, the unit short-cycling on high-pressure cutout, or the motor running hot and humming without turning.

• Specs: 1/4 HP | 208-230V | 1-Phase | 1100 RPM | 1.5 Amps | 60 Hz | CWLE Rotation (counter-clockwise looking from lead end) | 1/2" Shaft Diameter | 1.5" Shaft Length | Frame 48Y (5 5/8" diameter) | 3-Wire
• OEM vs Generic: This is the genuine Carrier OEM part (HC39GR234), manufactured to factory tolerances for your PY2PNB048130AB unit. OEM motors ensure correct rotation, shaft geometry, and thermal protection ratings — generic motors may vary in RPM and amperage draw, risking compressor damage or premature re-failure.
• Install difficulty: 3/5 — Disconnect all power before beginning. Tools needed: 1/4" and 5/16" nut driver, wire stripper, needle-nose pliers, fan blade puller (strongly recommended), multimeter. Photograph all wiring before disconnecting. It is also highly recommended to replace the run capacitor at the same time — a capacitor out of tolerance can cause immediate re-failure of the new motor.
• Warranty: 1-year OEM factory warranty. In-stock and ships same business day from our warehouse.

Compatibility: Direct OEM replacement for Carrier model PY2PNB048130AB (4-ton packaged unit). Always verify rotation, HP, voltage, and shaft dimensions against your unit's data plate before ordering. Our fitment team is available to confirm compatibility before you buy — don't guess on a motor.