OEM Carrier Condenser Fan Motor 1/8 HP 825 RPM for Model PY2PNB042060NB (HC35GE235)
This is the factory OEM replacement condenser fan motor for the Carrier PY2PNB042060NB split-system air conditioner. The condenser fan motor drives the outdoor fan blade, pulling air across the condenser coil to dissipate heat and reject it outside. When this motor fails, the compressor quickly overheats and the system either trips on high-pressure lockout, short-cycles, or shuts down entirely — leaving you with no cooling. A failed motor may present as a unit that hums but the outdoor fan doesn't spin, or a fan that runs intermittently before stopping.
-
Specs: 1/8 HP | 825 RPM | 208-230 VAC | 60 Hz | Single Phase | 0.90 Full Load Amps | PSC (Permanent Split Capacitor) motor type | Clockwise rotation | Shaft-down mount | Replaces GE/Genteq 5KCP39FFS244CS
-
OEM vs Generic: This is the genuine Carrier factory part (HC35GE235), built to exact torque, RPM, and thermal-protection specifications. Aftermarket motors often deviate in rotation, mounting dimensions, or FLA ratings — risking premature failure or voided equipment warranty.
-
Install Difficulty: 3/5 — Disconnect and lock out power at the disconnect box before opening the unit. Tools needed: 1/4" and 5/16" nut drivers, wire stripper, multimeter, and needle-nose pliers. Always photograph the existing wiring harness before disconnecting. We strongly recommend replacing the run capacitor at the same time as the motor for best reliability.
-
Warranty: 1-year OEM factory warranty against defects. In-stock orders ship same business day from our warehouse.
Compatibility: Engineered as the direct OEM replacement for Carrier model PY2PNB042060NB. Verify motor HP, RPM, voltage, and rotation direction on your unit's data plate before ordering. Not sure it fits? Our HVAC parts specialists verify fitment before you buy — contact us today and get your system back up and running fast.