OEM Carrier Condenser Fan Motor HC35GE235 — 1/8 HP 825 RPM 208-230V for Model PY2PNB030040NB
This is the genuine OEM factory-specified condenser fan motor for the Carrier PY2PNB030040NB packaged unit. The condenser fan motor drives the outdoor fan blade to pull air across the condenser coil, rejecting heat from the refrigerant circuit. When this motor fails, the condenser coil overheats, triggering high-pressure lockout, short-cycling, or complete system shutdown — often leaving the compressor running with no airflow, which can cause compressor damage if not addressed promptly.
-
Specs: 1/8 HP | 825 RPM | 208-230 VAC | 60 Hz | Single Phase | 0.90 Full Load Amps | PSC (Permanent Split Capacitor) motor type | Clockwise rotation | Shaft-down mount | Replaces GE Genteq 5KCP39FFS244CS and superseded P/N HC35GE235A
-
OEM vs Generic: This OEM Carrier motor is wound and balanced to exact factory tolerances, ensuring proper airflow, correct RPM, and full warranty coverage. Aftermarket motors often deviate in shaft length, rotation direction, or RPM — causing blade clearance issues, reduced efficiency, or premature bearing failure.
-
Install Difficulty: 3/5 — Disconnect and lock out power before beginning. Tools needed: 5/16" and 3/8" nut drivers, adjustable wrench, multimeter, capacitor discharge tool. Always photograph original wiring and blade pitch before removal. Replace the run capacitor at the same time — motor failures frequently stress or damage capacitors.
-
Warranty: 1-year OEM factory warranty. In-stock and ships same business day from our warehouse.
Compatibility: Direct OEM replacement for Carrier model PY2PNB030040NB packaged units. Confirm voltage, HP, RPM, and shaft orientation against your unit's data plate before ordering. Not sure it fits? Our HVAC parts specialists verify fitment before you buy — contact us anytime.