OEM Carrier Flame Sensor for PY2PEB060130NB Packaged Furnace

The flame sensor is a single metal rod that confirms your Carrier PY2PEB060130NB burners actually lit during each heating cycle. It works by flame rectification: once the burner flame surrounds the rod, a tiny microamp current flows back to the control board, telling it to keep the gas valve open. As the rod oxidizes and carbon accumulates, that signal weakens until the board shuts the gas off as a safety. Homeowners notice the furnace lighting for a few seconds then dying, burners that ignite and cut out every 3–7 seconds, repeated short-cycling, or a no-heat lockout after several failed tries. This is a stainless/Kanthal sensing rod with a ceramic insulator and a single spade or screw terminal. A healthy flame signal is typically in the 1–6 µA range; below roughly 0.5–1 µA the board drops out. The rod length, bend, and bracket geometry must match so the tip sits squarely inside the flame envelope. For flame sensors, OEM fit is about geometry as much as metallurgy. Generic rods are often made from thinner steel that oxidizes faster, and a rod that is the wrong length or angle sits at the edge of the flame, producing a weak, erratic microamp signal and constant nuisance lockouts. A genuine Carrier rod restores a strong, stable signal. Install difficulty: 2 of 5. Tools: 1/4" nut driver, fine emery cloth or Scotch-Brite pad, and a multimeter capable of reading microamps. Safety: turn off the gas supply and kill the power at the disconnect before removing the rod; never sand a live sensor. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PY2PEB060130NB. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.