OEM Carrier Condenser Fan Motor 1/4 HP 460V for Model PY2PEB060130AB

This is the genuine OEM factory-specified condenser fan motor for the Carrier PY2PEB060130AB packaged unit. The condenser fan motor drives the outdoor fan blade, pulling air across the condenser coil to reject heat from the refrigerant. When this motor fails, the condenser coil can no longer shed heat — leading to high head pressure, compressor overload, system lockout, and in severe cases, compressor failure. Common symptoms include the outdoor unit running briefly then shutting off, the fan blade not spinning while the compressor runs, or a humming sound with no fan movement.

• Specs: 1/4 HP | 460/400V | 60/50 Hz | 0.70 Amps | 1100/900 RPM | Single Phase | 48Y Frame (5 5/8" diameter) | 1.5" shaft | CW rotation (shaft end) | Closed enclosure | OEM Part # HC39GE468 / HC39GE468A | GE Genteq cross-reference: 5KCP39KFV110AS
• OEM vs Generic: This is a genuine Carrier Factory Authorized Part engineered to exact motor performance specifications — including winding temperature tolerances, RPM accuracy, and natural frequency tuning — to ensure correct airflow, minimize sound, and protect the compressor. Generic motors frequently deviate in shaft length, rotation, or RPM, risking poor airflow and premature system failure.
• Install difficulty: 3/5 — Requires disconnecting 460V power at the disconnect box before opening the unit. Tools needed: multimeter, 5/16" and 3/8" nut drivers, wire strippers, and needle-nose pliers. Photograph all wiring connections before removal. Verify fan blade set-screw torque after installation. A dual-run capacitor replacement is strongly recommended at the same time.
• Warranty: 1-year OEM factory warranty against defects. Ships same business day from our warehouse when ordered before cutoff.

Compatibility: Direct OEM replacement for Carrier model PY2PEB060130AB. Also cross-references Carrier/Bryant/Payne applications requiring HC39GE468 or HC39GE468A. Always verify voltage (460V), HP (1/4), RPM (1100/900), and rotation against your unit's data plate before ordering. Our team is available to confirm fitment — contact us before you buy.