OEM Carrier Condenser Fan Motor 1/4 HP 460V — HC39GE468 for Model PY2PEB060115NB

This is the genuine OEM factory-specified condenser fan motor for the Carrier PY2PEB060115NB packaged unit. The condenser fan motor drives the outdoor fan blade, pulling air across the condenser coil to reject heat and maintain proper refrigerant pressure. When this motor fails, the system will rapidly overheat, trigger high-pressure lockout, or run briefly before shutting down entirely — leaving you with a no-cool call in the middle of peak season.

• Specs: 1/4 HP | 460/400V | 60/50 Hz | 1100/900 RPM | 0.70A | Single Phase | CW Rotation (shaft up) | 48Y Frame | 5-5/8" Diameter | 1.5" Shaft | Closed Enclosure | Replaces GE/Genteq 5KCP39KFV110AS
• OEM vs Generic: This Factory Authorized Part is engineered to exact Carrier specifications — correct RPM for designed airflow, matched natural frequencies to minimize vibration and noise, and UL/CSA-qualified construction rated for 100,000 on/off cycles and 50,000 total running hours. Generic motors often run off-spec RPM, reducing system efficiency and shortening compressor life.
• Install Difficulty: 3/5 — Requires lockout/tagout of 460V power before any work begins. Tools needed: multimeter, nut driver set, needle-nose pliers, wire stripper, and motor capacitor tester. Photograph all wiring before disconnecting. Verify rotation direction and shaft orientation before final mounting. Recommend replacing the run capacitor simultaneously.
• Warranty: 1-year OEM factory warranty. In-stock and ships same business day from our warehouse.

Compatibility: Designed for the Carrier PY2PEB060115NB 5-ton packaged unit operating on 460V commercial power. Also cross-references HC39GE468A. Verify voltage, HP, and RPM on your unit's data plate before ordering — this motor is rated for 460/400V commercial applications and is not intended for standard 208-230V residential equipment. Our HVAC parts specialists are available to confirm fitment before you buy.